Reader and interface versions
The SXK-A200QR is an integrated UHF RFID reader with an LED display. The A200Q and A200R variants have different interface combinations, including serial, Wiegand, Ethernet, 4G or PoE where specified.
SXK-A200QR
UHF Reader
The SXK-A200QR is an integrated UHF RFID reader with an LED display. The A200Q and A200R variants have different interface combinations, including serial, Wiegand, Ethernet, 4G or PoE where specified.
1-32 dBmRF output power
Features & configuration.
Installers and system integrators matching vehicle credentials to an existing access controller.
Match the controller
Use the model table in the datasheet to select the reader interface and input or output count. Send the exact variant code and the controller interface when you request a quote.
Select the exact interface version
The A200Q and A200R variants have different interface combinations. Order by the variant table rather than assuming that Ethernet, 4G or PoE is fitted to every reader.
Test the reader and tag together
Read range depends on the tag, mounting position and surrounding conditions. Check the chosen tag at the actual vehicle approach before fixing the reader position.
Interfaces & connections.
Identify the connectors and terminal labels before planning the controller connection.
RJ45 LAN & network LED
10/100 Mbps Ethernet supports selectable TCP server/client modes. The network LED is identified beside the LAN connector. The 4G version does not provide the RJ45 LAN port.
DC power & optional PoE
The DC jack is 5.5 × 2.5 mm, center positive and outer negative, for 9-24 V DC input. PoE versions use the specified 37-57 V DC supply. Confirm the ordered power version.
Expansion ports
Two expansion-port positions are shown on the reader. Confirm their fitted functions and accessories with the exact model configuration.
P1 / Relay outputs
The illustrated connector has two relay contact pairs.
| Pin | Signal | Function |
|---|---|---|
| 1-2 | NX1 / CM1 | Relay 1 contact pair |
| 3-4 | NX2 / CM2 | Relay 2 contact pair |
Use the switch signal of the selected relay. Available output counts follow the ordered version.
P2 / Wiegand & RS485
Connection labels for the access controller or supported serial interface.
| Pin | Signal | Function |
|---|---|---|
| 1 | WG0 | Wiegand data 0 |
| 2 | WG1 | Wiegand data 1 |
| 3 | GND | Ground |
| 4 | 485A | RS485 A |
| 5 | 485B | RS485 B |
Wiegand supports 26/34 formats. Match the communication interface to the selected reader version.
P3 / Inputs, RS232 & power
Trigger inputs, serial data and terminal-block power input.
| Pin | Signal | Function |
|---|---|---|
| 1 | IN1 | Trigger input 1 |
| 2 | IN2 | Trigger input 2 |
| 3 | RXD | RS232 receive data |
| 4 | TXD | RS232 transmit data |
| 5 | GND | Ground |
| 6 | +12 | Power input: 9-24 V DC |
The supplied RS232 specification lists 115200 bit/s as default, with 9600, 19200, 38400, 56000 and 57600 bit/s options.
The diagram shows the illustrated connection layout. Fitted interfaces and input/output counts depend on the ordered model.
Compare interface versionsTechnical reference: interface diagram, p. 3; interface specifications, p. 4.
Reader interface versions
| Model | RS232 | Wiegand | RS485 | Ethernet | 4G | PoE | Inputs | Outputs |
|---|---|---|---|---|---|---|---|---|
| SXK-A200Q-DR-1N1A | — | √ | √ | — | — | — | 1 | 1 |
| SXK-A200Q-CDNR-2N2A | √ | √ | √ | √ | — | — | 2 | 2 |
| SXK-A200Q-CDNPR-2N2A | √ | √ | √ | √ | — | √ | 2 | 2 |
| SXK-A200Q-CDGR-2N2A | √ | √ | √ | — | √ | — | 2 | 2 |
| SXK-A200R-CDNR-2N2A | √ | √ | √ | √ | — | — | 2 | 2 |
| SXK-A200R-CDNPR-2N2A | √ | √ | √ | √ | — | √ | 2 | 2 |
| SXK-A200R-CDGR-2N2A | √ | √ | √ | — | √ | — | 2 | 2 |
Model selection reference from the supplied datasheet. Confirm the exact version and installation drawing with the order.
Matching SXK-TG11 UHF windshield tag.
Pair the SXK-A200QR reader with SXK-TG11 windshield tags for vehicle identification.
SXK-TG11 UHF Parking Tag
The SXK-TG11 is a self-adhesive UHF RFID tag for vehicle windshields. It uses an Alien H3 chip, an aluminum antenna and EPC Class 1 Gen 2 communication in the 860–960 MHz band.
Adhesive mounting on glass
The tag uses an aluminum antenna and a self-adhesive windshield format. Check the windshield position with the selected UHF reader before applying tags across a vehicle fleet.
Specify the credential batch
Confirm the reader protocol and the credentials the controller expects. Include any logo, tag-size or identifier requirements in the order brief.
SXK-TG11 tag specifications
These values apply to the tag; reader specifications are listed separately below.
Device & construction
- Brand and model
- Thinkpark SXK-TG11
- Product type
- UHF RFID windshield sticker
- Antenna material
- Aluminum
- Face material
- Thermal paper
- Color
- White
- Dimensions
- 110 × 45 × 0.3 mm
- Mounting
- Self-adhesive on glass
Operation & performance
- Operating frequency
- 860–960 MHz
- IC
- Alien H3
- EPC memory
- 96 bits
- User memory
- 512 bits
- Read range
- Up to 10 m on glass; depends on the reader, glass and installation
- Data retention
- 10 years; supplied rating
- Packaging
- PP bag and corrugated paper box
Interfaces & integration
- Air interface protocol
- ISO 18000-6C / EPC Class 1 Gen 2
Power & environment
- Operating temperature
- −10 °C to +70 °C
How it fits your project.
A reader specification does not automatically apply to its paired tag. Read range and identification behaviour depend on the selected combination.
- Present the matching credential
- Read or wake the credential
- Send the identity or access signal
- Apply controller permissions
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Reader and credential model
- Frequency and interface version
- Mounting position and vehicle approach
- Controller protocol and identifier requirements
Specs.
Details for equipment review and installation planning.
Device & construction
- Dimensions
- 290 × 290 × 82 mm
- Weight
- 2.2 kg
- Housing material
- ASA + aluminum
Operation & performance
- Operating frequency
- 902-928 MHz, 865-868 MHz (US, EU, China and fixed-frequency settings; freely configurable)
- Read range
- 0-15 m; R2000 version: 0-30 m (depending on tags and environment)
Interfaces & integration
- Ethernet interface
- 10/100 Mbps auto-sensing; selectable TCP server/client modes; cross-network data transmission
- Wiegand interface
- Wiegand 26/34 standards
Power & environment
- RF output power
- 1-32 dBm; R2000 version: 1-33 dBm (default: 30 dBm; software adjustable)
- Power connector
- Standard DC 5.5 × 2.5 mm jack + 3.5 mm pitch terminal block
- Operating voltage
- Standard supply: 9-24 V DC; PoE supply: 37-57 V DC
- Power consumption
- 12 W (max.)
- Protection rating
- IEC IP65
- Operating temperature
- -20 to +70 °C
Technical reference: datasheet p. 4.
Size drawings
Review the dimensions and installation clearances. Select a drawing to enlarge it.
Applications.
Match the equipment to the site, the users and the access workflow.
Existing vehicle lanes
Confirm the installed controller and credential type before replacing a reader. Test the actual approach and mounting position.
Vehicle identification lane illustration; reader and tag models vary by project.Staff and resident access
Define the vehicle credential batch and access permissions. Check the reader and tag pairing before deployment.
Project planning exampleDistributor supply
Order by the complete reader or tag version. Record the interface, power arrangement and required accessories.
Project planning exampleDownloads.
Product documents for your technical review.
Reader Datasheet
Product functions, specifications and configuration scope.
SXK-TG11 Tag Datasheet
Specifications for the matching SXK-TG11 UHF windshield tag.
Before you order.
Questions about selection, integration and installation.
What is the SXK-A200QR UHF Reader used for?+
The SXK-A200QR is an integrated UHF RFID reader with an LED display. The A200Q and A200R variants have different interface combinations, including serial, Wiegand, Ethernet, 4G or PoE where specified.
Which vehicle tag is paired with this reader?+
Pair the SXK-A200QR reader with SXK-TG11 windshield tags for vehicle identification. Reader and tag specifications are listed separately on this page.
Will it work with my existing credentials?+
Send the credential technology and existing reader or controller details. Compatibility must be checked against the exact version.
Is the listed read range guaranteed at every site?+
Read performance depends on the credential, mounting position and surrounding conditions. Test the proposed combination at the site.
What should I include with an order?+
Specify the exact model or variant, quantity, interface, supply and mounting requirements. For tags, include the matching reader and credential requirements.
What should I confirm before ordering SXK-A200QR?+
Use the model table in the datasheet to select the reader interface and input or output count. Send the exact variant code and the controller interface when you request a quote.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.