Nested aluminum sections
The SXK-BAT01 adjusts manually from 3.5 to 6 m of working length. Secure the overlap joint at the selected length before operating the barrier.
SXK-BAT01
Telescopic Arm
The SXK-BAT01 adjusts manually from 3.5 to 6 m of working length. Secure the overlap joint at the selected length before operating the barrier.
OctagonalOuter profile
OctagonalInner profile
3.5 to 6.0 mWorking adjustment range
Features & configuration.
Distributors and installers ordering replacement arms or a project-specific arm assembly.
Confirm the lane measurement
Send the lane opening and barrier cabinet position. Use the required reach to review the arm and counterbalance together.
Order the arm for the operator
Send the barrier model and holder details with the required arm configuration. Check the complete installed mass and balance before commissioning.
Check clearance through the full travel
Arm length is different from the clear vehicle opening. Review the closed reach, raised position and any additional folding or release movement.
How it fits your project.
Replacement-arm reference dimensions do not approve that arm length for every operator. Confirm the complete barrier assembly separately.
- Measure the opening
- Match the arm and holder
- Balance the complete assembly
- Set travel and test detection
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Operator model and holder dimensions
- Finished length and clear lane opening
- Arm mass, balance and tip support
- Complete travel envelope and selected accessories
Specs.
Details for equipment review and installation planning.
Device & construction
- Product type
- Manually adjustable telescopic barrier arm
- Construction
- Reinforced aluminum alloy nested profiles
- Outer profile
- Octagonal; nominal external section 100 x 45 mm
- Inner profile
- Octagonal; nominal external section 94 x 37 mm
- Nominal wall thickness
- 1.1 mm arm construction; confirm section-specific wall on the approved drawing
- Maximum extended length
- 6.0 m / 6000 mm
- Compact storage length
- 3.65 m / 3650 mm
- Reference weight
- Net 4.5 kg; gross 5.5 kg
- Surface and end finish
- White with red warning / reflective markings; fitted end caps
Operation & performance
- Working adjustment range
- 3.5 to 6.0 m
- Adjustment and locking
- Manual sliding adjustment; secure the joint on both sides as specified
- Operator connection
- Matched holder; mounting pattern follows the selected operator
Technical reference: datasheet p. 2.
Size drawings
Review the dimensions and installation clearances. Select a drawing to enlarge it.
Applications.
Match the equipment to the site, the users and the access workflow.
Replacement arms
Identify the barrier operator and holder dimensions before selecting an arm. Review any change in mass and installed accessories.
Barrier arm application illustration; a complete barrier installation is shown.Entrance configuration
Choose the arm geometry for the lane opening and overhead space. Confirm the complete sweep before preparing the site.
Project planning exampleDistributor stock orders
State the finished length, profile, fittings and markings. Separate the arm supply from the complete operator configuration.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Before you order.
Questions about selection, integration and installation.
What is the SXK-BAT01 Telescopic Arm used for?+
The SXK-BAT01 adjusts manually from 3.5 to 6 m of working length. Secure the overlap joint at the selected length before operating the barrier.
Will this arm fit any barrier gate?+
No. Holder geometry, arm mass, balance and operator limits must match the complete assembly. Send the existing operator and mounting details.
Can I select the arm from lane width alone?+
Check cabinet setback, root engagement and tip clearance as well as width. Folding and release configurations also need additional movement clearance.
What must be adjusted after an arm change?+
Review spring or counterbalance settings, end positions and movement. Test the connected detection and obstruction response with the new arm fitted.
What should I confirm before ordering SXK-BAT01?+
Send the lane opening and barrier cabinet position. Use the required reach to review the arm and counterbalance together.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.