Driver call point at the lane
The SXK-PT02 combines a call button, camera and speaker in a freestanding steel column. Drivers can call an operator for help with entry, payment or exit.
SXK-PT02
Parking Intercom Terminal
The SXK-PT02 combines a call button, camera and speaker in a freestanding steel column. Drivers can call an operator for help with entry, payment or exit.
12V DCOperating supply
Features & configuration.
Parking installers and operators planning driver assistance and control-room calls.
Connect voice, video and gate controls
The terminal supports SIP 2.0 and ONVIF and has open and close relay outputs. Tell us which intercom platform and gate controller will be used.
A driver call point
The freestanding column puts the call button, camera and speaker beside the lane. Position it where the driver can reach the button from the stopping point.
Review voice, video and gate control
The terminal supports SIP 2.0 and ONVIF with open and close relay outputs. Confirm the intercom platform and controller before connecting the lane.
How it fits your project.
Network options, cameras and gate-control paths follow the ordered terminal, station and platform configuration.
- Place a lane call
- Connect voice and video
- Review the driver request
- Apply the authorised gate command
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Number and position of lane terminals
- Intercom platform and call routing
- Network and power arrangement
- Gate-command interface and operator permissions
Specs.
Details for equipment review and installation planning.
Device & construction
- Model
- SXK-PT02
- Product type
- Freestanding video intercom terminal for parking lanes
- Overall dimensions
- 1250 × 150 × 90 mm; height × width × depth
- Body material
- Galvanized steel sheet
- Installation form
- Freestanding column with fixing base
Operation & performance
- Processor
- Embedded system on chip processor
- Operating system
- Embedded Linux
- Camera sensor
- 2 megapixel CMOS
- Camera assistance
- Wide angle camera with illumination module
- Video compression
- H.264 at 25 frames per second
- Audio processing
- Noise reduction, echo cancellation and feedback suppression
- Audio codec
- G.711
- Base footprint
- 230 × 170 mm
- Front panel
- Brushed aluminum alloy
Interfaces & integration
- Audio input
- Built-in high sensitivity omnidirectional microphone
- Audio output
- Built-in 5W speaker
- Call and video integration
- SIP 2.0 and ONVIF
- Network interface
- 10/100 Mbps autosensing Ethernet
- Network configurations
- Wired Ethernet, Wi-Fi and 4G; specify the required configuration
- Gate relay interfaces
- One opening relay path and one closing relay path
- Input interfaces
- 3 input channels for sensor / I/O integration
Power & environment
- Operating supply
- 12V DC
- Power consumption
- ≤10W
- Operating temperature
- -30 to +75 °C
Technical reference: datasheet p. 2, datasheet p. 4.
Applications.
Match the equipment to the site, the users and the access workflow.
Entry assistance
Place the driver terminal beside the stopping position. Define call routing and the operator response workflow.
Parking entrance assistance illustration; intercom and control equipment vary by project.Payment and exit assistance
Connect the help point to the parking operation. Confirm how an authorised operator handles release requests.
Project planning exampleControl-room operation
Plan the operator station, network and connected lane terminals. Set user permissions for gate commands.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Before you order.
Questions about selection, integration and installation.
What is the SXK-PT02 Parking Intercom Terminal used for?+
The SXK-PT02 combines a call button, camera and speaker in a freestanding steel column. Drivers can call an operator for help with entry, payment or exit.
Can it use our intercom platform?+
Send the platform and network requirements. Confirm protocol compatibility and call routing for the exact terminal and station configuration.
Can an operator control the barrier?+
Review the supported relay or platform command path with the gate controller. Confirm the authorised actions for the operator.
What should be tested before handover?+
Test each call point, voice and video connection, call routing and permitted gate actions. Check the driver reach and operator position.
What should I confirm before ordering SXK-PT02?+
The terminal supports SIP 2.0 and ONVIF and has open and close relay outputs. Tell us which intercom platform and gate controller will be used.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.