Full-color entrance and exit display
The SXK-TP-LED24 uses an 80 × 80 LED matrix with a 4 mm pixel pitch. It supports multilingual display content and brightness adjustment.
SXK-TP-LED24
Parking Display
The SXK-TP-LED24 uses an 80 × 80 LED matrix with a 4 mm pixel pitch. It supports multilingual display content and brightness adjustment.
100 V–240 V ACPower Supply
Features & configuration.
Parking installers and integrators presenting driver messages and lane indications.
Connect to the site system
The datasheet lists Ethernet, RS232, RS485 and USB. Tell us how your software will send content or sensor data to the display.
Configure the information drivers need
The display presents content supplied by the connected system. Confirm the language, plate information, fees or parking messages required at the lane.
Connect the content source
Match the Ethernet or serial connection to the selected software. Define how messages and any payment images will reach the display before commissioning.
How it fits your project.
Displayed fees, parking counts and payment images depend on the connected platform and configured content source.
- Receive the message or state
- Apply the display configuration
- Show information to drivers
- Verify the lane sequence
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Message, language or signal states
- Driver sightline and mounting position
- Supply and control interface
- Content platform and wiring arrangement
Specs.
Details for equipment review and installation planning.
Device & construction
- Display dimensions
- 320 × 320 mm
- Product Dimensions
- 364 mm × 483 mm × 73.8 mm (14.33" × 19.02" × 2.91") (L × W × H)
- Net Weight
- 7.2 kg (15.87 lb)
- Gross Weight
- 8 kg (17.64 lb)
Operation & performance
- Resolution
- 6,400 dots (80 × 80); 4 lines; Pixel pitch: 4mm ( 0.16")
- Published service life
- 100,000 hours
- Screen Brightness
- ≥4,500 cd/m2 (Level 16 Auto/100 Manual operation)
- View Angle
- ≥120° (Vertical), ≥120°（Horizontal）
- IP Rating
- IP65
Interfaces & integration
- RS-485
- 1
Power & environment
- Power Supply
- 100 V–240 V AC
- Power Consumption
- < 30 W
- Operating Temperature
- –40 °C to +70 °C (–40 °F to +158 °F)
- Operating Humidity
- 10%–90% (non-condensing)
Technical reference: datasheet p. 2, datasheet p. 1.
Applications.
Match the equipment to the site, the users and the access workflow.
Parking entrances
Position the display or signal where approaching drivers can see it. Confirm the message, state and stopping point.
Parking lane display illustration; display type, messages and equipment layout vary by project.Managed exits
Coordinate fee, permission or lane-state information with the parking workflow. Check which system supplies the content.
Project planning exampleEquipment integration
Match the electrical or network interface to the controller. Test the configured messages and states before handover.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Before you order.
Questions about selection, integration and installation.
What is the SXK-TP-LED24 Parking Display used for?+
The SXK-TP-LED24 uses an 80 × 80 LED matrix with a 4 mm pixel pitch. It supports multilingual display content and brightness adjustment.
Which system sends the information?+
The controller or parking platform supplies the configured content or signal state. Confirm the interface and data source before ordering.
Can the content or mounting be configured?+
Specify the required message, language, mounting and electrical arrangement. Available configuration depends on the selected model.
What should be checked on the lane?+
Verify driver visibility, mounting clearance and the complete message or signal sequence. Test the unit with its actual controller connection.
What should I confirm before ordering SXK-TP-LED24?+
The datasheet lists Ethernet, RS232, RS485 and USB. Tell us how your software will send content or sensor data to the display.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.