Directional vehicle identification
The SXK-Y17 works with the SXK-AC05 active vehicle tag. It uses directional optical wake-up and reads the tag after it enters the reader's detection field.
SXK-Y17
Bluetooth Parking Reader
The SXK-Y17 works with the SXK-AC05 active vehicle tag. It uses directional optical wake-up and reads the tag after it enters the reader's detection field.
433 MHzOperating radio frequency
12-18 V DCOperating supply
Features & configuration.
Installers and system integrators matching vehicle credentials to an existing access controller.
Choose the interface
The datasheet lists relay, RS485 and Wiegand interfaces by version. Send the lane approach and your controller input so we can identify the correct reader version.
Wake the tag in the lane
Directional optical wake-up defines where an SXK-AC05 tag becomes active. Aim the reader against the actual approach rather than choosing a mounting angle from distance alone.
Choose the controller signal
Relay, RS485 and Wiegand connections vary by version. Match the reader output to the controller before ordering or replacing a reader.
Matching SXK-AC05 active vehicle tag.
Pair the SXK-Y17 reader with SXK-AC05 in-vehicle active tags for vehicle identification.
SXK-AC05 Active Vehicle Tag
The SXK-AC05 is the active vehicle tag used with the SXK-Y17 parking reader. It wakes in the reader field before sending its identity.
A tag for the SXK-Y17 reader
The SXK-AC05 is the in-vehicle credential used by the SXK-Y17 system. Its identity is transmitted after wake-up in the reader field.
Expand an existing vehicle group
Send the existing SXK-Y17 reader and parking controller details. Confirm the credential requirements before adding tags for more vehicles.
SXK-AC05 tag specifications
These values apply to the tag; reader specifications are listed separately below.
Device & construction
- Model
- SXK-AC05
- Product role
- In-vehicle active identification credential
Operation & performance
- Matching reader
- SXK-Y17
- Recommended position
- Behind the windshield, near the rearview mirror
- Orientation
- IR wake window facing the reader; optical path kept clear
Interfaces & integration
- Wake and communication
- Optical wake-up; CDMA active RF; low-power sleep
- Tag protocol
- CDMA
Power & environment
- Published battery service life
- More than 3 years with low-power sleep / wake operation
How it fits your project.
A reader specification does not automatically apply to its paired tag. Read range and identification behaviour depend on the selected combination.
- Present the matching credential
- Read or wake the credential
- Send the identity or access signal
- Apply controller permissions
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Reader and credential model
- Frequency and interface version
- Mounting position and vehicle approach
- Controller protocol and identifier requirements
Specs.
Details for equipment review and installation planning.
Device & construction
- Reader model
- SXK-Y17
- Reader dimensions
- 250 x 300 x 70 mm
- Stand height and weight
- 1100-1500 mm adjustable; 4 kg
- Finish and mounting
- Yellow / orange / dark grey; universal adjuster; stand
Operation & performance
- Long-range reading distance
- 1-20 m
- Horizontal reading angle
- 60°
- Identification response
- Less than 0.2 s
- Recognition speed reference
- 60 km/h listed in the reader manual
- Reading interval
- Less than 0.5 s; relay repeat mode has a separate 3 s interval
- Operating radio frequency
- 433 MHz
- Infrared signal modulation
- 38 kHz
- Receiver sensitivity
- -110 dBm, listed in the original reader manual
Interfaces & integration
- Tag protocol
- CDMA
- Interface options
- Relay opening; Wiegand 26 / 34; RS485
- Serial rates
- 9600 / 19200 bit/s selectable on the standard interface board
- Antenna connector
- SMA, 50 ohms
Power & environment
- Operating supply
- 12-18 V DC
- Operating power
- 12 W
- Power adapter
- 110-220 V AC input / +12 V DC output
- Housing and protection
- Metal enclosure with PMMA front; IP66
- Operating temperature
- -40 to +75 degrees C
- Relative humidity
- 95% RH
Technical reference: datasheet p. 2.
Wiring diagrams.
Review the supplied connection drawings. Select a drawing to enlarge the labels and terminals.
Applications.
Match the equipment to the site, the users and the access workflow.
Existing vehicle lanes
Confirm the installed controller and credential type before replacing a reader. Test the actual approach and mounting position.
Vehicle identification lane illustration; reader and tag models vary by project.Staff and resident access
Define the vehicle credential batch and access permissions. Check the reader and tag pairing before deployment.
Project planning exampleDistributor supply
Order by the complete reader or tag version. Record the interface, power arrangement and required accessories.
Project planning exampleDownloads.
Product documents for your technical review.
Reader Datasheet
Product functions, specifications and configuration scope.
SXK-AC05 Tag Datasheet
Specifications for the matching SXK-AC05 active vehicle tag.
Before you order.
Questions about selection, integration and installation.
What is the SXK-Y17 Bluetooth Parking Reader used for?+
The SXK-Y17 works with the SXK-AC05 active vehicle tag. It uses directional optical wake-up and reads the tag after it enters the reader's detection field.
Which vehicle tag is paired with this reader?+
Pair the SXK-Y17 reader with SXK-AC05 in-vehicle active tags for vehicle identification. Reader and tag specifications are listed separately on this page.
Will it work with my existing credentials?+
Send the credential technology and existing reader or controller details. Compatibility must be checked against the exact version.
Is the listed read range guaranteed at every site?+
Read performance depends on the credential, mounting position and surrounding conditions. Test the proposed combination at the site.
What should I include with an order?+
Specify the exact model or variant, quantity, interface, supply and mounting requirements. For tags, include the matching reader and credential requirements.
What should I confirm before ordering SXK-Y17?+
The datasheet lists relay, RS485 and Wiegand interfaces by version. Send the lane approach and your controller input so we can identify the correct reader version.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.