Compact swing gate
The SXK-BZ01 series uses a 24 V DC brushless drive and relay inputs for compatible readers or push buttons. The documented passage width range is 600–950 mm.
SXK-BZ01
Compact Swing Gate
The SXK-BZ01 series uses a 24 V DC brushless drive and relay inputs for compatible readers or push buttons. The documented passage width range is 600–950 mm.
600-950 mmClear passage width
Brushless motor, 40 W / 24 V DCMotor
40 persons/min in normally open modeThroughput
Features & configuration.
Installation contractors and system integrators configuring pedestrian entrance lanes.
Compare SXK-BZ01 and BZ01N
The datasheet gives separate dimensions for the two cabinet versions. Select the cabinet and entry direction against the finished opening and the selected access control mode.
Plan the panel movement
Show the pedestal or cabinet positions and the swing area on the plan. Keep the operating area clear of fixed furniture and adjacent routes.
Define the access modes
Specify the entry and exit directions and the release behaviour required by the site. Match the selected reader and controller before installation.
Compare SXK-BZ01 cabinets
| Version | Cabinet L × W × H |
|---|---|
| SXK-BZ01 | 1200 × 280 × 1000 mm |
| BZ01N | 1200 × 160 × 980 mm |
Model selection reference from the supplied datasheet. Confirm the exact version and installation drawing with the order.
How it fits your project.
Throughput depends on the selected mechanism, passage configuration and authorisation time. Review the exact installation environment and ordered configuration.
- Read the access credential
- Receive the authorisation signal
- Release the selected passage
- Reset and report lane state
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Entrance drawing and lane count
- Clear passage and total cabinet footprint
- Reader, controller and credential type
- Release behaviour, power and installation environment
Specs.
Details for equipment review and installation planning.
Device & construction
- Model / product type
- SXK-BZ01 / N, Swing Gate
- Cabinet size L x W x H
- 1200 x280 x1000 mm/ 1200 x 160 x 980 mm nominal; see drawing note
- Clear passage width
- 600-950 mm
- Cabinet material
- SUS304 stainless steel
- Material thickness
- Top cover 1.15 mm; body 0.95 mm
Operation & performance
- Motor
- Brushless motor, 40 W / 24 V DC
- Throughput
- 40 persons/min in normally open mode; 25-30 in normally closed mode
- Opening / closing time
- 0.8-2 s, adjustable
- Infrared sensors
- 4 pairs
- Operating modes
- One-way / bidirectional; normally open / normally closed
Interfaces & integration
- Control input
- Relay switching signal; external push-button input
Power & environment
- Power input
- 220 V AC ±10%, 50 Hz
- Power-loss behaviour
- Automatic opening; opening direction configurable
- Working temperature
- -25 to +70 °C
- Working humidity
- 5-90% RH
- Installation environment
- Indoor or outdoor with a protective canopy recommended
Technical reference: datasheet p. 2.
Size drawings
Review the dimensions and installation clearances. Select a drawing to enlarge it.
Applications.
Match the equipment to the site, the users and the access workflow.
Office and visitor entrances
Match the lane arrangement to reception access and visitor handling. Confirm reader mounting and the required clear passage.
Pedestrian entrance system illustration; gate models and lane layouts vary by project.Staff and campus checkpoints
Define the entry and exit directions and the way users present credentials. Check the installed reader and controller connection.
Project planning exampleMulti-lane installation
Count end and shared centre cabinets against the plan. Review the total footprint, service access and emergency release behaviour.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Before you order.
Questions about selection, integration and installation.
What is the SXK-BZ01 Compact Swing Gate used for?+
The SXK-BZ01 series uses a 24 V DC brushless drive and relay inputs for compatible readers or push buttons. The documented passage width range is 600–950 mm.
Does the cabinet width define the passage width?+
No. The clear passage depends on cabinet spacing, panel or arm configuration and the lane arrangement. Check the complete layout.
Can it use our own access controller?+
Send the controller interface and reader details. The gate and controller must use a compatible authorisation and release connection.
Is every version suitable outdoors?+
Review the specific model rating and installation environment. Confirm exposure, drainage and the selected configuration before ordering.
What should I confirm before ordering SXK-BZ01?+
The datasheet gives separate dimensions for the two cabinet versions. Select the cabinet and entry direction against the finished opening and the selected access control mode.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.