Adjustable reach
The SXK-BAT01 uses nested aluminum sections with a working range of 3.5 to 6 m. Once the length is set and secured, the arm operates at that fixed length.
SXK-D01T
Telescopic Arm Barrier
The SXK-BAT01 uses nested aluminum sections with a working range of 3.5 to 6 m. Once the length is set and secured, the arm operates at that fixed length.
24 V brushless DC motorDrive type
180 WMotor output power
Features & configuration.
Installation contractors and distributors specifying a complete vehicle access lane.
Confirm the installed length
Tell us the final lane opening and cabinet position. Use the drawing to check both the closed reach and the full raised position.
Match the motion to the fitted arm
Opening and closing settings must suit the complete arm, holder and spring balance. Recheck the settings after changing the arm or adding accessories.
Plan detection and control together
The controller accepts compatible open, close and stop commands, plus the specified detection inputs. Loop, radar and photocell equipment must be selected and tested for the actual lane.
Assign the relay outputs
The two configurable relays share the selected output mode. Confirm the required status feedback, traffic indication and external control before wiring the lane.
How it fits your project.
Set and secure the telescopic overlap before operation. The boom raises and lowers at its fixed installed length; it does not extend or retract during each movement.
- Receive the access command
- Check the lane detection
- Move the balanced arm
- Confirm passage and closing
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Clear lane width and cabinet side
- Lowest overhead obstruction and full arm sweep
- Finished arm length, holder and balance
- Supply version, detector and controller inputs
Specs.
Details for equipment review and installation planning.
Device & construction
- Product model
- SXK-D01T
- Cabinet dimensions
- 340 × 345 × 1030 mm (W × D × H)
- Surface and colors
- High-temperature powder coating; Agate Black and Silver Gray
- Arm model
- SXK-BAT01; project configured assembly
- Working length range
- 3.5 to 6.0 m; manually adjusted and locked
- Compact storage length
- 3.65 m
- Outer and inner sections
- 100 x 45 mm outer; 94 x 37 mm inner
- Reference arm weight
- 4.5 kg net; 5.5 kg gross
- Adjustment and mounting
- Secure the overlap joint; use a matched SXK-D01 holder
Operation & performance
- Operator platform
- SXK-D01 family
- Drive type
- 24 V brushless DC motor; gear reduction, linkage and balancing spring
- Motor speed
- 780 r/min no-load; 600 r/min rated
- MCBF
- 5 million cycles; published operator figure
- Opening and closing motion
- Independent speed adjustment; deceleration and end-position adjustment
- Obstruction response
- Automatic reversal during closing; sensitivity and motor force adjustable
- Manual movement
- Motor handwheel; isolate power before use
- Automatic opening on mains failure
- With optional matched 24 V backup power module
- Nominal wall
- 1.1 mm; confirm each section on the approved drawing
Interfaces & integration
- AC input version
- AC 110–120 V or AC 200–240 V; specify the factory supply version
- Command and detection inputs
- Open / close / stop; loop or radar; infrared photocell
- Relay outputs
- Two configurable relays; mode selected through H-16
Power & environment
- Control-panel supply
- 24 V DC, 7.5 A
- Motor output power
- 180 W
- Motor insulation
- Class F
- Auxiliary power output
- 12 V DC, 1 A maximum shared accessory load
- Operating environment
- -40 to +75 °C; up to 90% RH, non-condensing
Technical reference: datasheet p. 4.
Size drawings
Review the dimensions and installation clearances. Select a drawing to enlarge it.
Wiring diagrams.
Review the supplied connection drawings. Select a drawing to enlarge the labels and terminals.
Applications.
Match the equipment to the site, the users and the access workflow.
Staff and residential entrances
Select the arm for the clear opening and available headroom. Coordinate the resident or staff access system with vehicle detection.
Application illustrationCommercial parking lanes
Confirm the parking terminal, detector and driver indications together. Review the vehicle stopping point and arm sweep.
Project planning exampleReplacement and integration projects
Identify the installed controller and available supply. Check arm mass, holder, balance and control signals before replacement.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Wiring Diagram
Check the device connections against the selected controller.
Before you order.
Questions about selection, integration and installation.
What is the SXK-D01T Telescopic Arm Barrier used for?+
The SXK-BAT01 uses nested aluminum sections with a working range of 3.5 to 6 m. Once the length is set and secured, the arm operates at that fixed length.
Is arm length the same as the clear lane width?+
No. Cabinet setback, holder engagement and tip clearance affect the usable opening. Send the lane drawing before selecting the finished arm length.
Are radar, loop detectors and photocells included?+
Confirm each device in the ordered supply scope. The detector selection and commissioning must suit the actual lane and controller.
Can we use a different arm later?+
An arm change affects mass, balance and movement settings. Review the holder, spring and operator limits before fitting another configuration.
What should I confirm before ordering SXK-D01T?+
Tell us the final lane opening and cabinet position. Use the drawing to check both the closed reach and the full raised position.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.