24 V brushless drive
The SXK-D20 uses a 24 V DC brushless drive for vehicle entry and exit. Use the datasheet to compare its control functions with your lane requirements.
SXK-D20
Brushless Barrier Gate
The SXK-D20 uses a 24 V DC brushless drive for vehicle entry and exit. Use the datasheet to compare its control functions with your lane requirements.
100 WOutput power
Features & configuration.
Installation contractors and distributors specifying a complete vehicle access lane.
Specify the lane equipment
Send the required arm length, cabinet side and existing controller. Tell us whether a vehicle detector, traffic light or parking terminal is part of the installation.
Specify the complete lane
The 24 V brushless drive is one part of the installation. Match the arm, detector, controller and any traffic indication to the entrance layout.
Check the opening envelope
The required clear lane width differs from the arm length. Include cabinet setback and the raised arm position in the installation drawing.
How it fits your project.
Published drive figures apply to the specified assembly. Set movement for the actual arm, balance and connected detection equipment.
- Receive the access command
- Check the lane detection
- Move the balanced arm
- Confirm passage and closing
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Clear lane width and cabinet side
- Lowest overhead obstruction and full arm sweep
- Finished arm length, holder and balance
- Supply version, detector and controller inputs
Specs.
Details for equipment review and installation planning.
Device & construction
- Model
- SXK-D20
- Arm length
- 2–6 m
- Cabinet dimensions
- 330 × 260 × 980 mm
- Cabinet colors
- Agate Black / Champagne Gold
Operation & performance
- MCBF
- 5 million cycles, published figure
- Opening / closing adjustment
- 1.5–6 s
- Motor speed
- 1500 r/min
- Surface
- High-temperature powder coating
Power & environment
- Working voltage
- 24 V DC, 7.5 A
- Output power
- 100 W
- Working temperature
- −30 to +75 °C
- Working humidity
- Within 90%, non-condensing
- Supply-loss opening
- Requires additional backup power
Technical reference: datasheet p. 2.
Size drawings
Review the dimensions and installation clearances. Select a drawing to enlarge it.
Applications.
Match the equipment to the site, the users and the access workflow.
Staff and residential entrances
Select the arm for the clear opening and available headroom. Coordinate the resident or staff access system with vehicle detection.
Barrier lane application illustration; cabinet, arm and control equipment vary by project.Commercial parking lanes
Confirm the parking terminal, detector and driver indications together. Review the vehicle stopping point and arm sweep.
Project planning exampleReplacement and integration projects
Identify the installed controller and available supply. Check arm mass, holder, balance and control signals before replacement.
Project planning exampleDownloads.
Product documents for your technical review.
Before you order.
Questions about selection, integration and installation.
What is the SXK-D20 Brushless Barrier Gate used for?+
The SXK-D20 uses a 24 V DC brushless drive for vehicle entry and exit. Use the datasheet to compare its control functions with your lane requirements.
Is arm length the same as the clear lane width?+
No. Cabinet setback, holder engagement and tip clearance affect the usable opening. Send the lane drawing before selecting the finished arm length.
Are radar, loop detectors and photocells included?+
Confirm each device in the ordered supply scope. The detector selection and commissioning must suit the actual lane and controller.
Can we use a different arm later?+
An arm change affects mass, balance and movement settings. Review the holder, spring and operator limits before fitting another configuration.
What should I confirm before ordering SXK-D20?+
Send the required arm length, cabinet side and existing controller. Tell us whether a vehicle detector, traffic light or parking terminal is part of the installation.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.