Solar supply and battery
The SXK-D50 uses cabinet-mounted solar panels to charge an onboard battery. A 24 V brushless drive operates the straight arm, which is specified up to 6 m.
SXK-D50
Solar-Powered Barrier Gate
The SXK-D50 uses cabinet-mounted solar panels to charge an onboard battery. A 24 V brushless drive operates the straight arm, which is specified up to 6 m.
24 V DC brushless motorDrive motor
Features & configuration.
Installation contractors and distributors specifying a complete vehicle access lane.
Review the power budget
Send the installation location, expected gate movements and any accessory loads. The solar and battery configuration depends on those inputs.
Review solar and battery capacity
The cabinet-mounted solar panels charge an onboard battery. Share the installation location, expected movements and accessory loads for the power review.
Include accessory loads
A reader, detector or traffic light changes the installation power requirements. Confirm which devices use the barrier supply and which need a separate source.
How it fits your project.
Published drive figures apply to the specified assembly. Set movement for the actual arm, balance and connected detection equipment.
- Receive the access command
- Check the lane detection
- Move the balanced arm
- Confirm passage and closing
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Clear lane width and cabinet side
- Lowest overhead obstruction and full arm sweep
- Finished arm length, holder and balance
- Supply version, detector and controller inputs
Specs.
Details for equipment review and installation planning.
Device & construction
- Product model
- SXK-D50
- Cabinet dimensions
- 380 × 390 × 1070 mm nominal W × D × H
- Cabinet construction
- 2.0 mm cold-rolled steel; high-temperature baked finish
- Cabinet color
- Black
- Reference unit weight
- Approx. 65 kg; final supplied assembly dependent
Operation & performance
- Drive motor
- 24 V DC brushless motor; 120 W
- Opening and closing time
- Adjustable from 2 to 6 s, depending on boom configuration
- Straight boom
- Up to 6.0 m; aluminum alloy; nominal 80 × 45 mm section
- Fence boom
- Up to 5.0 m; matched aluminum fence assembly
- Operating references
- 6.0 m straight boom approx. 4 s; 5.0 m fence boom approx. 5 s
- Radio control
- 433 MHz; encrypted remote transmitter configuration
- Remote operating range
- Approx. 50 m under suitable open-site conditions
- Obstruction response
- Reversal on contact during closing
Power & environment
- Energy supply
- Cabinet-integrated photovoltaic array and rechargeable battery
- Solar charging controller
- MPPT photovoltaic conversion and charge regulation
- Photovoltaic array power
- 140 W nominal selected configuration
- Battery capacity
- 60 Ah nominal selected configuration
- Battery protection
- Overcharge and over-discharge protection
Technical reference: datasheet p. 3.
Size drawings
Review the dimensions and installation clearances. Select a drawing to enlarge it.
Applications.
Match the equipment to the site, the users and the access workflow.
Staff and residential entrances
Select the arm for the clear opening and available headroom. Coordinate the resident or staff access system with vehicle detection.
Application illustrationCommercial parking lanes
Confirm the parking terminal, detector and driver indications together. Review the vehicle stopping point and arm sweep.
Application illustrationReplacement and integration projects
Identify the installed controller and available supply. Check arm mass, holder, balance and control signals before replacement.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Before you order.
Questions about selection, integration and installation.
What is the SXK-D50 Solar-Powered Barrier Gate used for?+
The SXK-D50 uses cabinet-mounted solar panels to charge an onboard battery. A 24 V brushless drive operates the straight arm, which is specified up to 6 m.
Is arm length the same as the clear lane width?+
No. Cabinet setback, holder engagement and tip clearance affect the usable opening. Send the lane drawing before selecting the finished arm length.
Are radar, loop detectors and photocells included?+
Confirm each device in the ordered supply scope. The detector selection and commissioning must suit the actual lane and controller.
Can we use a different arm later?+
An arm change affects mass, balance and movement settings. Review the holder, spring and operator limits before fitting another configuration.
What should I confirm before ordering SXK-D50?+
Send the installation location, expected gate movements and any accessory loads. The solar and battery configuration depends on those inputs.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.