Signal light bar for poles
The SXK-GD1000 light bar mounts on a traffic signal pole or arm. The documented version uses an aluminum housing and follows the red, yellow and green signal states.
SXK-GD1000
Traffic Signal Pole Light Bar
The SXK-GD1000 light bar mounts on a traffic signal pole or arm. The documented version uses an aluminum housing and follows the red, yellow and green signal states.
24 V DCSupply voltage
R/G/Y each for 9.6 WRated power
Features & configuration.
Parking installers and integrators presenting driver messages and lane indications.
Plan the installation
Send the pole or arm dimensions and the intended signal interface. Use the wiring diagram for the selected control arrangement.
Follow the signal states
The light bar follows the configured red, yellow and green states. Confirm the signal interface and selected wiring arrangement before installation.
Fit the pole or arm
Specify the mounting dimensions and orientation. Use the supplied wiring diagram with the delivered connectors and control equipment.
How it fits your project.
Match the supply, mounting and signal logic to the selected unit. Confirm the complete indication sequence with the actual lane controller.
- Receive the message or state
- Apply the display configuration
- Show information to drivers
- Verify the lane sequence
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Message, language or signal states
- Driver sightline and mounting position
- Supply and control interface
- Content platform and wiring arrangement
Specs.
Details for equipment review and installation planning.
Device & construction
- Dimensions
- 1000 × 60 × 40mm
- Wavelength
- Red: 620–625 nm | Green: 520–525 nm | Yellow: 590-595
- Mounting orientation
- Vertical or horizontal; two band clamps per strip
Operation & performance
- Housing
- Aluminium with polymer-potted LED assembly
- LED source
- Epistar LED chips from Taiwan
- LED quantity
- 120 red LEDs + 120 green LEDs+ 120 yellow LEDs
- Luminous intensity
- Red: 5,000–6,000 mcd | Green: 8,667–10,400 mcd | Yellow: 5000-6000 mcd
- Beam angle
- 30°
- Housing angle
- 6° angled profile
- Response time
- < 100 ms
- Visibility range
- 1–1000 m
- Life cycle
- 100000h
Power & environment
- Supply voltage
- 24 V DC
- Rated power
- R/G/Y each for 9.6 W
- Operating temperature
- −40 to +75 °C
- Ingress protection
- IP65
Technical reference: datasheet p. 2.
Wiring diagrams.
Review the supplied connection drawings. Select a drawing to enlarge the labels and terminals.
Applications.
Match the equipment to the site, the users and the access workflow.
Parking entrances
Position the display or signal where approaching drivers can see it. Confirm the message, state and stopping point.
Parking lane display illustration; display type, messages and equipment layout vary by project.Managed exits
Coordinate fee, permission or lane-state information with the parking workflow. Check which system supplies the content.
Project planning exampleEquipment integration
Match the electrical or network interface to the controller. Test the configured messages and states before handover.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Wiring Diagram
Check the device connections against the selected controller.
Before you order.
Questions about selection, integration and installation.
What is the SXK-GD1000 Traffic Signal Pole Light Bar used for?+
The SXK-GD1000 light bar mounts on a traffic signal pole or arm. The documented version uses an aluminum housing and follows the red, yellow and green signal states.
How is the indication controlled?+
Confirm the selected unit and its control arrangement. Traffic signals, pole light bars and orientation-sensing strips use different connections and logic.
Can the content or mounting be configured?+
Specify the required message, language, mounting and electrical arrangement. Available configuration depends on the selected model.
What should be checked on the lane?+
Verify driver visibility, mounting clearance and the complete message or signal sequence. Test the unit with its actual controller connection.
What should I confirm before ordering SXK-GD1000?+
Send the pole or arm dimensions and the intended signal interface. Use the wiring diagram for the selected control arrangement.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.