Rising fence assembly
The SXK-KJZ01 combines a tall cabinet with a rising four-rail fence. The assembly uses a 24 V DC brushless drive and adjustable tip rests.
SXK-KJZ01
Heavy-Duty Barrier
The SXK-KJZ01 combines a tall cabinet with a rising four-rail fence. The assembly uses a 24 V DC brushless drive and adjustable tip rests.
300WRated power
Two configurable relaysOutputs and communication
Features & configuration.
Installation contractors and distributors specifying a complete vehicle access lane.
Check the full assembly
Use the dimensioned drawing to review the cabinet, fence and tip rests together. Send the proposed lane opening and the detection or controller equipment you plan to use.
A rising four-rail assembly
The cabinet, fence and adjustable tip rests form one operating assembly. Check all parts against the lane drawing rather than sizing the cabinet alone.
Allow the complete frame to move
The frame needs clearance throughout its travel. Include side space, overhead structures and the detection layout in the project review.
How it fits your project.
Published drive figures apply to the specified assembly. Set movement for the actual arm, balance and connected detection equipment.
- Receive the access command
- Check the lane detection
- Move the balanced arm
- Confirm passage and closing
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Clear lane width and cabinet side
- Lowest overhead obstruction and full arm sweep
- Finished arm length, holder and balance
- Supply version, detector and controller inputs
Specs.
Details for equipment review and installation planning.
Device & construction
- Product model
- SXK-KJZ01 airborne heavy duty rising fence barrier
- Cabinet dimensions
- 460 × 545 × 1400 mm nominal W × D × H
- Maximum overall length
- 7250 mm including cabinet; configured to the site
- Fence top rail height
- 1200 mm above ground in the supplied dimensional reference
- Lower rail ground clearance
- 180 mm nominal in the supplied dimensional reference
- Main boom section
- 150 × 50 mm nominal
- Lower rail section
- 86 × 44 mm nominal
Operation & performance
- Fence configuration
- Four horizontal rails with vertical infill; dark finish and red reflectors
- Vertical and cross members
- 55 × 16 mm nominal
- Drive and controller
- DC brushless motor with V3.7 controller configuration
- Opening and closing movement
- Independently adjustable; travel time set for the installed fence
- Automatic-close timer
- 0–255 s; 0 disables timer-based closing
- Post-passage closing delay
- 0–25.5 s in 0.1 s increments
- Command count
- Selectable modes; up to 255 opening commands in the extended mode
- Controller ambient range
- -35 to +75 °C; 30–80% RH, non-condensing
Interfaces & integration
- Tip support
- Two adjustable moving end rests as pictured
- Outputs and communication
- Two configurable relays; RS485 A/B
Power & environment
- Controller supply
- 24 V DC ±10%, 10 A; matched power supply required
- Input power
- AC220/110V, 50/60Hz
- Rated power
- 300W
- Controller standby power
- Less than 2 W; excludes motor holding and external loads
- Supply-loss operation
- Requires matched backup power and configured voltage/action settings
Technical reference: datasheet p. 5.
Size drawings
Review the dimensions and installation clearances. Select a drawing to enlarge it.
Applications.
Match the equipment to the site, the users and the access workflow.
Staff and residential entrances
Select the arm for the clear opening and available headroom. Coordinate the resident or staff access system with vehicle detection.
Application illustrationCommercial parking lanes
Confirm the parking terminal, detector and driver indications together. Review the vehicle stopping point and arm sweep.
Project planning exampleReplacement and integration projects
Identify the installed controller and available supply. Check arm mass, holder, balance and control signals before replacement.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Before you order.
Questions about selection, integration and installation.
What is the SXK-KJZ01 Heavy-Duty Barrier used for?+
The SXK-KJZ01 combines a tall cabinet with a rising four-rail fence. The assembly uses a 24 V DC brushless drive and adjustable tip rests.
Is arm length the same as the clear lane width?+
No. Cabinet setback, holder engagement and tip clearance affect the usable opening. Send the lane drawing before selecting the finished arm length.
Are radar, loop detectors and photocells included?+
Confirm each device in the ordered supply scope. The detector selection and commissioning must suit the actual lane and controller.
Can we use a different arm later?+
An arm change affects mass, balance and movement settings. Review the holder, spring and operator limits before fitting another configuration.
What should I confirm before ordering SXK-KJZ01?+
Use the dimensioned drawing to review the cabinet, fence and tip rests together. Send the proposed lane opening and the detection or controller equipment you plan to use.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.