Compact retracting flaps
The SXK-YZ01 combines retracting flaps, infrared detection and SUS304 cabinets. The documented cabinet measures 1,200 × 300 × 980 mm.
SXK-YZ01
Flap Barrier Gate
The SXK-YZ01 combines retracting flaps, infrared detection and SUS304 cabinets. The documented cabinet measures 1,200 × 300 × 980 mm.
AC 110 V or 220 V, 50/60 HzPower supply
60 WRated power
25to 35 persons per minuteTypical throughput
Features & configuration.
Installation contractors and system integrators configuring pedestrian entrance lanes.
Specify the lane group
The product drawings show single and double lane arrangements. Tell us the lane count, required flap and third-party reader or controller.
Test Record
Report 158072 records the flap gate under the sample name SXK-T2035, which corresponds to the SXK-YZ01. Its recorded checks include passage control, pedestrian protection, anti-tailgating, emergency release and electrical tests.
Build the lane group
Shared centre cabinets affect the total footprint of a multi-lane entrance. Confirm the lane count and clear passage against the selected cabinet arrangement.
Confirm the access equipment
The reader or biometric terminal supplies an authorisation signal through the agreed configuration. Check the reader position and required controller input before ordering.
How it fits your project.
Throughput depends on the selected mechanism, passage configuration and authorisation time. Review the exact installation environment and ordered configuration.
- Read the access credential
- Receive the authorisation signal
- Release the selected passage
- Reset and report lane state
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Entrance drawing and lane count
- Clear passage and total cabinet footprint
- Reader, controller and credential type
- Release behaviour, power and installation environment
Specs.
Details for equipment review and installation planning.
Device & construction
- Model
- SXK-YZ01
- Passage width
- 550 mm
- Cabinet dimensions
- 1200 × 300 × 980 mm (L × W × H)
- Cabinet material
- SUS304 stainless steel
- Material thickness
- Top lid 1.5 mm; side panels 1.2 mm
- Gross weight
- 57 kg
Operation & performance
- Drive
- DC brushless motor
- Typical throughput
- 25to 35 persons per minute
- Infrared detection
- 3 pairs
- Voice prompt
- Supported
Interfaces & integration
- Control input
- Dry contact / relay signal
Power & environment
- Power supply
- AC 110 V or 220 V, 50/60 Hz
- Rated power
- 60 W
- Ingress protection
- IP44
- Operating temperature
- −10 °C to +60 °C
- Operating humidity
- 5% to 85%
- Installation environment
- Indoors or sheltered outdoor locations
Technical reference: datasheet p. 2.
Applications.
Match the equipment to the site, the users and the access workflow.
Office and visitor entrances
Match the lane arrangement to reception access and visitor handling. Confirm reader mounting and the required clear passage.
Application illustrationStaff and campus checkpoints
Define the entry and exit directions and the way users present credentials. Check the installed reader and controller connection.
Application illustrationMulti-lane installation
Count end and shared centre cabinets against the plan. Review the total footprint, service access and emergency release behaviour.
Application illustrationDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
Before you order.
Questions about selection, integration and installation.
What is the SXK-YZ01 Flap Barrier Gate used for?+
The SXK-YZ01 combines retracting flaps, infrared detection and SUS304 cabinets. The documented cabinet measures 1,200 × 300 × 980 mm.
Does the cabinet width define the passage width?+
No. The clear passage depends on cabinet spacing, panel or arm configuration and the lane arrangement. Check the complete layout.
Can it use our own access controller?+
Send the controller interface and reader details. The gate and controller must use a compatible authorisation and release connection.
Is every version suitable outdoors?+
Review the specific model rating and installation environment. Confirm exposure, drainage and the selected configuration before ordering.
What should I confirm before ordering SXK-YZ01?+
The product drawings show single and double lane arrangements. Tell us the lane count, required flap and third-party reader or controller.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.