SXK-YZ09

Flap Barrier Gate

The SXK-YZ09 uses faceted SUS304 cabinets, transparent flaps and illuminated direction indicators. A brushless drive moves the flaps when the controller authorizes passage.

AC 110 V or 220 V, 50/60 HzPower supply
40 to 60 persons per minuteTypical throughput
Up to 550 mmPassage width

Features & configuration.

Installation contractors and system integrators configuring pedestrian entrance lanes.

Faceted cabinets and lane indicators

The SXK-YZ09 uses faceted SUS304 cabinets, transparent flaps and illuminated direction indicators. A brushless drive moves the flaps when the controller authorizes passage.

Plan a multi-lane entrance

The three-lane layout shows shared center cabinets. Use the entrance drawing to check where the reader and end cabinets will sit.

Build the lane group

Shared centre cabinets affect the total footprint of a multi-lane entrance. Confirm the lane count and clear passage against the selected cabinet arrangement.

Confirm the access equipment

The reader or biometric terminal supplies an authorisation signal through the agreed configuration. Check the reader position and required controller input before ordering.

How it fits your project.

Throughput depends on the selected mechanism, passage configuration and authorisation time. Review the exact installation environment and ordered configuration.

  1. Read the access credential
  2. Receive the authorisation signal
  3. Release the selected passage
  4. Reset and report lane state

Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.

Confirm before installation.

Send these details with your enquiry so we can review the equipment and configuration.

  • Entrance drawing and lane count
  • Clear passage and total cabinet footprint
  • Reader, controller and credential type
  • Release behaviour, power and installation environment

Specs.

Details for equipment review and installation planning.

Device & construction

Model
SXK-YZ09
Passage width
Up to 550 mm
Cabinet dimensions L × W × H
1400 × 300 × 1019 mm
Cabinet material
SUS304 stainless steel
Material thickness
Top lid 1.5 mm; side panels 1.2 mm
Gross weight
70 kg

Operation & performance

Drive
DC brushless motor
Typical throughput
40 to 60 persons per minute
Infrared detection
3 pairs
Voice prompt
Supported

Interfaces & integration

Control input
Dry contact / relay signal

Power & environment

Power supply
AC 110 V or 220 V, 50/60 Hz
Rated power
60 W
Ingress protection
IP44
Operating temperature
−10 °C to +60 °C
Operating humidity
5% to 85%
Installation environment
Indoors or sheltered outdoor locations

Technical reference: datasheet p. 2.

Applications.

Match the equipment to the site, the users and the access workflow.

Office and visitor entrances

Match the lane arrangement to reception access and visitor handling. Confirm reader mounting and the required clear passage.

Application illustration

Staff and campus checkpoints

Define the entry and exit directions and the way users present credentials. Check the installed reader and controller connection.

Project planning example

Multi-lane installation

Count end and shared centre cabinets against the plan. Review the total footprint, service access and emergency release behaviour.

Project planning example

Downloads.

Product documents for your technical review.

Before you order.

Questions about selection, integration and installation.

What is the SXK-YZ09 Flap Barrier Gate used for?+

The SXK-YZ09 uses faceted SUS304 cabinets, transparent flaps and illuminated direction indicators. A brushless drive moves the flaps when the controller authorizes passage.

Does the cabinet width define the passage width?+

No. The clear passage depends on cabinet spacing, panel or arm configuration and the lane arrangement. Check the complete layout.

Can it use our own access controller?+

Send the controller interface and reader details. The gate and controller must use a compatible authorisation and release connection.

Is every version suitable outdoors?+

Review the specific model rating and installation environment. Confirm exposure, drainage and the selected configuration before ordering.

What should I confirm before ordering SXK-YZ09?+

The three-lane layout shows shared center cabinets. Use the entrance drawing to check where the reader and end cabinets will sit.

How can you help with installation?+

We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.

Related equipment.

Let’s review your configuration.

Send the model, quantity and installation requirements. Include your layout or controller details where relevant.

Replies within 2 hours during Beijing business hours.

Chat on WhatsApp