Open and close controls
The SXK-COB02 provides separate wired OPEN and CLOSE push buttons. Its enclosure has cable-entry knockouts at the side and bottom.
SXK-COB02
Push Button Switch
The SXK-COB02 provides separate wired OPEN and CLOSE push buttons. Its enclosure has cable-entry knockouts at the side and bottom.
Features & configuration.
Installers and equipment buyers matching local controls and backup equipment to barrier cabinets.
Connect to the barrier controller
Use the shared SXK-COB02/COB03 datasheet to check the terminals and controller inputs. Choose the SXK-COB03 if the local station needs a separate rotary STOP control.
Two local commands
The station provides separate OPEN and CLOSE buttons. Check the controller command terminals and cable-entry arrangement before installation.
Choose the required control station
Use SXK-COB03 where the local station needs a separate rotary STOP control. The shared datasheet compares the two enclosures and command layouts.
How it fits your project.
Check the delivered module and controller diagrams before connection. Follow the specified isolation and commissioning procedure.
- Confirm the controller interface
- Connect the specified module
- Set the intended operation
- Test the complete barrier
Functional sequence for configuration planning. Use the approved project drawing for physical wiring and installation.
Confirm before installation.
Send these details with your enquiry so we can review the equipment and configuration.
- Barrier and controller model
- Supply and contact requirements
- Cabinet space and cable route
- Required operation and commissioning test
Specs.
Details for equipment review and installation planning.
Device & construction
- Model
- SXK-COB02
- Product type
- Enclosed manual control switch station
- Enclosure material
- ABS + PC
- Contact material
- Silver contacts
- Enclosure sealing
- Perimeter sealing strip and screw-fastened cover
- Installation
- Surface-mounted control station
- Finish shown
- Dark front cover with light enclosure base
- Enclosure dimensions
- 130 × 65 × 70 mm
Operation & performance
- Contact functions
- NO, NC, COM
- Utilization category markings
- AC-15 / DC-13
- Terminal connection
- Screw terminals on the contact blocks
- Cable entry
- Side and bottom knockouts
Power & environment
- Enclosure protection
- IP65, with enclosure sealed and cable entries correctly finished
- Conventional thermal current Ith
- 10 A
- Rated insulation voltage Ui
- 415 V
- Power requirement
- Passive switch contacts; connection follows controller input requirements
Technical reference: datasheet p. 1, datasheet p. 2.
Wiring diagrams.
Review the supplied connection drawings. Select a drawing to enlarge the labels and terminals.
Applications.
Match the equipment to the site, the users and the access workflow.
Local operator position
Define the commands an operator needs and the cable route. Check terminals and the compatible controller inputs.
Controlled parking entrance illustration; control and power components follow the project design.Cabinet integration
Review supply, mounting space and the required connection. Keep the installed module clear of moving components.
Project planning exampleReplacement equipment
Identify the existing controller and wiring before ordering. Verify the complete system after replacing the component.
Project planning exampleDownloads.
Product documents for your technical review.
Datasheet
Product functions, specifications and configuration scope.
User Manual
Installation, setup and operating reference.
Before you order.
Questions about selection, integration and installation.
What is the SXK-COB02 Push Button Switch used for?+
The SXK-COB02 provides separate wired OPEN and CLOSE push buttons. Its enclosure has cable-entry knockouts at the side and bottom.
Will it work with my current barrier?+
Send the barrier controller and wiring details. The module must match the required electrical and control interface.
What is included with the component?+
Confirm the module, fittings and wiring scope with the order. Other lane equipment remains separately specified.
What should be tested after connection?+
Check the intended command or backup function with the actual controller. Record the final settings and complete the system handover checks.
What should I confirm before ordering SXK-COB02?+
Use the shared SXK-COB02/COB03 datasheet to check the terminals and controller inputs. Choose the SXK-COB03 if the local station needs a separate rotary STOP control.
How can you help with installation?+
We provide remote video technical guidance, installation videos, wiring diagrams and installation instructions. For large projects, an engineer can provide on-site technical guidance.
Related equipment.
Let’s review your configuration.
Send the model, quantity and installation requirements. Include your layout or controller details where relevant.
Replies within 2 hours during Beijing business hours.